Friday, 6 January 2012

Nissin Di866 Mark 2 Nikon Mount


Nissin Di866 Mark 2 Nikon Mount

RM820.00





KEY FEATURES
Color and Auto Rotate Display bears simple and user friendly features of our design concept
The Color Display will automatically follow camera angle in different position and six icons interface gives user friendly operation and representing different menus – Auto, TTL, Manual/Av, Multi, Wireless TTL (Master/Remote) and Customer Setting.

Various Functions – TTL, Manual/Av, Multi Flash
TTL: Supporting Canon E-TTL/E-TTL II , Nikon i-TTL/i-TTL-BL and Sony ADI/P-TTL. Flash light is automatically controlled by the camera but the flash exposure value can be compensated.Manual: Flash power can be adjusted manually at 22 levels, from full power to 1/128 power at every 1/3 stops. The appropriate distance to the subject is shown in the display in accordance with the aperture value set on the camera.Av priority: The flash light can be automatically controlled by the photo sensor built-in the flash unit instead of TTL metering. The F. Stop can be set from F1.4~F16. The distance at the F-stop set on the flash and camera is shown in the display.Multi Flash: The power ratio can be set from 1/8 to 1/128.






MORE FEATURES
Sub-Flash
04 The Di866 Mark II provides an extra small flash (GN12) below the main flash. This small flash gives a fill-in light while bouncing the main flash. Bouncing the light may shadow the underside of face, and this fill-in flash brightens up the shadow. The power ratio of Sub-Flash can be set from 1/1 to 1/128

Auto Zoom
08 Auto Zoom covers 24~105mm focal range. Light diffusing panel covers wide 18mm (35mm format)

My TTL
TTL exposure level is accurately calibrated for standard balance in accordance with Nissin’s standard. If any adjustment is however required, or if you like to set your own preferable level, it can be adjust for about +3Ev. ~-3Ev. by every 1/3 step.

Quick Loading Battery Magazine
06 The Di866 Mark II has battery magazine system same as Di866 professional and Di466. A convenient battery magazine provides all four AA-size batteries slot in the same direction, so that the batteries can be correctly inserted without fail even in the poor light condition.

External Service Box
External Power Pack Socket – Di866 Mark II supports Nissin Power Pack PS 300.
X terminal – Di866 Mark II has X-terminal socket for flash synchronization.
USB Service Port – Di866 Mark II provides a USB port to update the latest firmware.

Rear curtain sync and High speed shutter
11 In Rear curtain sync., the flash fires just before the rear curtain closed. By using this function at slow shutter speed, a moving subject will appear with such moving
marks behind.
High speed sync. is recommended for daylight flash photography.

Flash head tilts up to 90°and rotates horizontally 90°to the right and 180°to the left.

Fill-in reflector and Light diffusing panel installed


Specifications

  • Usable camera : Canon digital camera, Nikon digital camera, Sony digita camera
  • Guide Number (ISO100) : 60m, 198ft. (105mm), 40m, 132ft. (35mm)
  • Focal length Coverage : 24~105mm (18mm with wide angle diffuser)
  • Power Source : 4 x AA battery
  • Recycle Time : 0.1-5.5 sec. (Alkaline, NiMH)
  • Number of Flashes : 150-1500 times
  • Flash Duration : Manual mode 1/300 (Full Power) , TTL mode 1/300-1/30000 sec.
  • Energy Saving : Auto power off Off, 10, 15, 30, 45, 60 mins
    Stand-by mode 30 sec.
    Display off Display screen switch off
  • Color Temperature : 5600K
  • Flash Power Control System : Full Auto E-TTL, E-TTL II (for Canon), i-TTL/i-TTL-BL (for Nikon), ADI/P-TTL(for Sony), Ev compensation adjustment on camera
    TTL E-TTL, E-TTL II (for Canon), i-TTL/i-TTL-BL (for Nikon),ADI/P-TTL(for Sony) [Advanced] Ev compensation, Manual zoom, Sub-flash allowed
    Auto Aperture Flash F1.4-F16 (ISO100), 1/3 Ev steps, [Advanced] Manual zoom, Sub-flash allowed
    Manual Power Full-1/128, 1/3Ev steps, [Advanced] Manual zoom, Sub-flash allowed
    Multi-flash Frequency-90Hz, 1-90 times, Power 1/8-1/128
  • Wireless Remote flash Slave:
    Slave Digital Slave / Film Slave, [Advanced] Sub-Flash Allowed
    Wireless TTL Master / Remote, 4 Channels, 3 Groups (A, B, C)[RMT, RMT2 for Sony], Modes: Off/ TTL/ Manual, TTL Flash Ratio Adjustable
  • Ev Compensation on flash : -0.3 - +3.0, 1/3Ev steps
  • My TTL setting : -0.3 - +3.0, 1/3Ev steps
  • Bounce Function : Upward 90 degree, Left 90 degree, Right 180 degree
  • Sub-flash: Manual Full - 1/128, 1Ev steps
  • FE/FV Lock : [FEL] OR [*] Button for Canon, [AE-L] OR [AF-L] for Nikon
  • Rear curtain sync. : Yes
  • High speed sync. : Yes
  • Red eye reduction mode for Nikon: Yes
  • Slow sync. mode for Nikon: Yes
  • Red eye reduction mode + Slow sync. mode for Nikon : Yes
  • AF assist light distance : 0.7-10m
  • Operation Control mode : Color Display (Auto Rotation)
  • Firmware Update Terminal : USB
  • X terminal : Yes
  • External power pack socket : Nissin Power Pack PS-300, Canon original pack, Nikon original pack (except Nikon SD-9), Sony original pack
  • Accessories : Soft Pouch, Flash Stand with Tripod screw
  • Dimension : 74(W) x 134(H) x 110(D) mm / 2.9(W) x 5.3(H) x 4.3(D) inches
  • Weight : 380gr. w/o battery
Notice: Design and specification are subject to change without prior notice.

Hoya HMC ND400 67mm


Hoya HMC ND400 67mm

RM380

Photographing solar eclipses and ultra-bright light sources can be extremely dangerous. Hoya HMC ND400 filter reduces light values by 9 stops to less than 1/500th of its original intensity and allows safe photography. It can also be used to achieve super slow shutter speeds in daylight to render moving subjects invisible.

Extra slow shutter speed during bring daylight to render moving objects invisible




Yongnuo 465 TTL Flashgun Nikon Mount


Yongnuo 465 TTL Flashgun Nikon Mount



Yongnuo 465 TTL Flashgun comes with TTL and 7 power level manual mode. A good affordable flashgun for beginners to start with. Simple to use and all buttons are just in the right place for easy operation. The head supports horizontal and vertical rotation for creative angle bounce either vertically or horizontally.

Specifications: 
* Guide number: 33
* Flash mode: TTL, M
* Circuit design: insulated gate bipolar transistor (IGBT)
* Vertical rotation angle: 0 to 90 degrees
* Horizontal rotation angle: 0 to 270 degrees
* Power: 4 x AA size batteries (alkaline or Ni-MH are usable)
* Recycle time: approximately 5s (AA alkaline cell used)
* Color temperature: 5,600K
* Flash time: 1/800 to 1/20,000s
* Flash control: TTL auto flash or manual Level 7 light quantity output control
* Dimensions: 72 x 135 x 85mm
* Net weight: 250g
* Accessories: flash light (1), protecting bag (1), and manual (1)
Note:YN-465 for Nikon can only be used with Nikon i-TTL cameras (not compatible with D100 D50 D2Hs D2X D70 D2H)
YN-465 for Canon can only be used with Canon E-TTL cameras (not compatible to Canon A-TTL, thus not compatible with Canon 5D, 5DII,1D, 1DS, 1DSI, 1DSII,1DSIII)




Monday, 2 January 2012

Meike MK-D5100 Battery Grip for Nikon D5100


Meike MK-D5100 Battery Grip for Nikon D5100

RM170.00

Meike MK-D5100 Battery Grip for Nikon D5100 DSLRs is finally here for all D5100 fans. Nikon doesn't produce grip for D5100. This model is will provide the extra battery capacity and versatility of a vertical grip for D5100. MK-D5100 will hold 1 or 2 EN-EL14 battery.  
The MK-D5100  also provides a comfortable vertical grip with an additional shutter release for shooting in the vertical orientation. A short cable connects the battery grip to the Nikon D5100's remote port to provide this functionality. The grip also has a tripod socket.
Package comes with:
MK-D5100 Grip
Connection Cable
User's guide
Contact : 0145852813 for more details.
or email @ thekedaikamera@gmail.com





Meike MK-D5100 Battery Grip for Nikon D5100

Meike MK-D5100 Battery Grip for Nikon D5100

RM155.00







Meike MK-D5100 Battery Grip for Nikon D5100 DSLRs is finally here for all D5100 fans. Nikon doesn't produce grip for D5100. This model is will provide the extra battery capacity and versatility of a vertical grip for D5100. MK-D5100 will hold 1 or 2 EN-EL14 battery.  
The MK-D5100  also provides a comfortable vertical grip with an additional shutter release for shooting in the vertical orientation. A short cable connects the battery grip to the Nikon D5100's remote port to provide this functionality. The grip also has a tripod socket.
Package comes with:
MK-D5100 Grip
Connection Cable
User's guide

Contact : 0145852813 for more details.
or email @ thekedaikamera@gmail.com







Meike MK-550D Battery Grip + Meike LP-E8 Battery for Canon 550D & 600D


Meike MK-550D Battery Grip + Meike LP-E8 Battery for Canon 550D & 600D

RM270.00

Meike MK-550D Vertical Grip/Battery Holder for Canon EOS 550D / Rebel T2i  digital cameras.  This battery grip can hold two batteries LP-E8 or six size-AA batteries.  It is also equipped with a vertical-grip shutter button, Main Dial, AE lock/FE lock and AF point selection controls for easier vertical shooting.  Also has Tripod Socket. 100% same as the original BG-E8 battery grip with finishing as close as possible to the camera body. 

Package comes with:
  • 1 unit battery grip
  • LP-E8 battery magazine and AA battery magazine
  • Instruction Manual
  • 1 unit LP-E8 (1800mAh)
Contact : 0145852813 for more details.
or email @ thekedaikamera@gmail.com














Meike MK-1100D Battery Grip for Canon EOS 1100D


Meike MK-1100D Battery Grip for Canon EOS 1100D

RM155.00







Meike MK-1100D Battery Grip for Canon 1100D DSLRs is finally here for all 1100D fans. Canon doesn't produce grip for 1100D. This model is will provide the extra battery capacity and versatility of a vertical grip for 1100D. MK-1100D will hold 1 or 2 LP-E10 battery.  
The MK-1100D  also provides a comfortable vertical grip with an additional shutter release for shooting in the vertical orientation. A short cable connects the battery grip to the Canon 1100D's remote port to provide this functionality. The grip also has a tripod socket.
Package comes with:
MK-1100D Grip
Connection Cable
User's guide



RM155.00



Contact : 0145852813 for more details.
or email @ thekedaikamera@gmail.com

Meike MK-60D for Canon EOS 60D Battery Grip












Meike MK-60D for Canon EOS 60D
RM280.00
Meike MK-60D Vertical Grip/Battery Holder for Canon EOS 60D. This battery grip can hold two LP-E6 or six AA size batteries to offer double-length shooting time. It is also equipped with a vertical-grip shutter button, dial, AElock/FE lock button, and AF point selection button to make shooting with the camera in a vertical position just as comfortable as shooting horizontally. Same as the original Canon BG-E9.

Package includes:
Battery Holder for six AA batteries
Battery Holder for two LP-E6 rechargeable batteries
Instruction Manual
All the pictures below are self taken by our team at GstrapInUse.com. What you see is what you get. Some pictures are taken up close to reveal its quality.

PRICE : RM280 nett

Contact : 0145852813 for more details.
or email @ thekedaikamera@gmail.com
Related Posts Plugin for WordPress, Blogger...